Download these measurement guidelines in Adobe PDF format..
To view it you will require the Adobe Acrobat Reader, which is free to download here
It really is very easy to ‘measure-up’ for your new ACORN Superglide straight Stairlift. All you need is a good quality metal tape measure.
Firstly, take a general overview of your stairway layout and decide which side of the staircase the Stairlift will be mounted on, when viewed from the bottom. Be aware that the Stairlift rail will overhang the top landing by 8" (20cm) and meet the floor at the foot of the stairs 14" (36cm) beyond the ‘nose’ of the first step.
Take note of any fixtures, such as window sills, hand rails, central heating radiators, doorways etc., that intrude into the stairway area - or could be blocked by the presence of the Stairlift. Decide, which side of the stairway will be most appropriate for the Stairlift, requiring the least amount of disruption - or obstruction. In most cases, it’s a fairly obvious choice.
Now that you have decided which side of the stairway the Stairlift will be sited, you should measure the staircase.
1
2
3
4
5
Please specify the units of the dimensions and enter the staircase measurements in the boxes provided.
1 - Overall Length of Staircase
Note: This should be a straight measurement from the nose of the top landing to the floor, at the foot of the stairway.
2 - Staircase Width
Note: You many find that your staircase width varies a little, over the length of the stairway. Record the measurement at its narrowest point.
3 - Clearance at Bottom of Staircase
Note: A minimum of 20" (51cms) is required for this measurement.
4 - Clearance at Top of Staircase
Note: A minimum of 20" (51cms) is required for this measurement.
|
Please choose your nearest ACORN Stair Lifts website.
|
|
| Privacy Policy | © 2009 ACORN Stairlifts |